Power Off Theory:
If, when you install a cartridge you get the message, ‘your printer does not recognise this cartridge’ please do the following:
1) While the printer is turned on open the door and wait for the printer to stop motioning;
2) When the printer has stopped moving, take the offending cartridge(s) out and close the door;
3) When the printer stops motioning, turn the power off at the wall or remove power from back of printer for 1 – 2 minutes;
4) Plug power back in and turn on. The printer engine will run, whir back and forth;
5) When the printer has stopped motioning, install the cartridge(s) that were removed;
Cartridge(s) should be accepted at this point.
Blog Categories
Latest Blogs
- Power Off Theory - If my cartridge is not recognised.
24 June, 2014
In Printer Maintenance - Head Cleaning - When Should I Do It?
12 June, 2014
In Printer Maintenance - Why is Printer Maintenance Important?
12 May, 2014
In Printer Maintenance
Power Off Theory - If my cartridge is not recognised.
Posted
in Printer Maintenance
@ Jun 24th 2014 9:14am
- By EasyRefills .com.au
Comments
Add Your Comments
All comments will be submitted to the administrator for approval.